The Model EP3 is an industrial quality, two-position three-way solenoid air valve for use in applications where the operation of a pneumatically operated device is dependent upon an electrical circuit. A momentary manual override push button provides operation without closing the electrical circuit. An LED provides visual indication of the air valve's status. The valve can be mounted in any position with body mounting holes or with the mounting plate furnished with the valve. Each EP3 also comes with 16" lead wires and three barbed fittings for 1/4" plastic tubing. FEATURES LED indication and mounting plate Industrial quality High capacity Manual override Universal porting Piping determines N.C., N.O., diverter, or selector CERTIFICATIONS SPECIFICATIONS Pressure range 0-50 psig Flow constant Cv 0.04 Air capacity 500 scim (0.29 scfm) @ 15 psig Media Clean air or inert gases Air connections Three barbed fittings (1/4" poly) Ambient temp 0° to 122°F (-18° to 50°C) Override Momentary button Indication Red LED on when energized Coil voltage/power 115V*/2.5W continuous duty 24V*/2.5W continuous duty Voltage tolerance +15%, -10% of rated coil voltage Materials Electroless nickel, Buna N, stainless steel, anodized aluminum Wiring 16" lead wires with connector Weight 0.2 lb (0.9 kg) Agency UL recognized component *Voltage can be AC (50/60 Hz) or DC. For AC operation, use 2587-7 AC lead wire , included with 24 VAC and 120 VAC models. For DC operation use 2458-0 cable included with the 24 VDC model.