The 2200 Series Fixed Insertion Vortex Flow Meter is used to measure the flow rate of water and water/glycol solutions. It can be used in 2" to 20" (5 to 50 cm) lines. Mounting is accomplished through a 1-1/2" weld-o-let. The 2200 Series features +-1.0% accuracy, up to a 50:1 turndown, and no moving parts. Each unit is CE approved, comes with a 4-20 mA output and is available with a local display and totalizer. FEATURES +-1.0% accuracy (%FS) No moving parts Optional integral display SPECIFICATIONS Accuracy +-1.0% of full scale (combined linearity & repeatability) Enclosure Reinforced polycarbonate NEMA 6 Ambient temp -20 to 140F (-29 to 60C) Fluid temp 32 to 160F (0 to 70C) Pressure rating 400 psig (2759 kPa) Pipe sizes 2" to 20" (5-51 cm) Pipe connection 1-1/2" male NPT standard Power 10-32 VDC Output 4-20 mA, loop powered Min flow 0.5 fps Wetted parts Vortex sensor Ultem®(plastic) Shedder bar 316 stainless steel Stem Aluminum O-rings EPDM Compression fitting Brass